The OSCTEK Electro-Mechanical Oscillator
The Ultimate in Economy and Value
Features
The Oscillator
- Maximum linear thrust in excess of 750 kg
- Speed range of 7.5mm to 90mm/min.
- Stroke length adjustable between 25mm and 315mm in 1mm increments
- Motor voltage is 240Vac 3 phase
- Overall length of 985mm and weight of 22 Kgs
The Control Panel
- Enclosure manufactured from GRP to European Standard IP66
- Requires a supply voltage of 110 or 220/240 Vac, 50/60Hz single phase
- Fully compatible with EC Directives
- Overall dimensions of 400mm x 300mm x 200mm with an overall weight of 12.0 Kgs
Operation
Stroke length is converted to a pulse-count within the PLC, and immediately after this figure is reached, the motor is reversed and returns to the home position.
The process is then repeated.
Speed variation is achieved within the control panel by changing the frequency to the motor. An illuminated screen on the front of the control panel shows current speed and stroke.
Specifications
The Oscillator
- Gear motor induction wound, 230 volts AC 3 phase
- Gearhead - spur-type gearbox with precision ball bearings on rotating shafts
- Double-row angular contact ball bearings supporting the ballscrew assembly, complete with seals
- Posi-seal nose assembly, lubricated, sealed reservoir complete with felt wick
- All wetted parts 316 or 316L stainless steel
- Nose assembly, barrel and motor cover are all protected by O-ring seals
The Control Panel
- Variable frequency drive (inverter)
- Speed controlled either manually or by 4 to 20mA signal from DCS
- Programmable logic controller (PLC) with dedicated software
- Human Machine Interface (HMI) displays speed, stroke length and alarm signal
- Volt free contact for water shut-off
- Control panel has facilities for a remote run signal and remote emergency stop
800 Series Hydraulic | EMO III Electro-Mechanical | EMO III SP (Special Purpose) | OutBack Electro-Mechanical | Osctek Electro-Mechanical